Bifunctional activation of amine-boranes by the W/Pd bimetallic analogs of “frustrated Lewis pairs”

The reaction between basic [(PCP)Pd(H)] (PCP = 2,6-(CH₂P(t-C₄H₉)₂)₂C₆H₄) and acidic [LWH(CO)₃] (L = Cp (1a), Tp (1b); Cp = η⁵-cyclopentadienyl, Tp = κ³-hydridotris(pyrazolyl)borate) leads to the formation of bimolecular complexes [LW(CO)₂(μ-CO)⋯Pd(PCP)] (4a, 4b), which catalyze amine-borane (Me₂NHBH₃, ^tBuNH₂BH₃) dehydrogenation. The combination of variable-temperature (¹H, ³¹P{¹H}, ¹¹B NMR and IR) spectroscopies and computational (ωB97XD/def2-TZVP) studies reveal the formation of an η¹-borane complex [(PCP)Pd(Me₂NHBH₃)]⁺[LW(CO₃)]⁻ (5) in the first step, where a BH bond strongly binds palladium and an amine group is hydrogen-bonded to tungsten. The subsequent intracomplex proton transfer is the rate-determining step, followed by an almost barrierless hydride transfer. Bimetallic species 4 are easily regenerated through hydrogen evolution in the reaction between two hydrides.

Bimetallic complexes [LW(CO)₂(μ-CO)⋯Pd(PCP)] cooperatively activate amine-boranes for their dehydrogenation via N–H proton tunneling at RDS and H₂ evolution from two neutral hydrides.     

First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

Determination of chlormequat and mepiquat in pear,tomato, and wheat flour using on-line solid-phase extraction (Prospekt) coupled with liquid chromatography-electrospray ionization tandem mass spectrometry

A new methodology based on pressurized liquid extraction (PLE) followed by LC-MS is presented for the simultaneous and unequivocal determination of alkylphenol ethoxylates (APEOs) and their degradation products, alkylphenols (APs) and alkylphenoxy carboxylates (APECs), in sediment samples. The protocol, applicable to a full range of APEO oligomers and degradation products, permits the sensitive and selective determination of APEOs (nEO = 1-15), APECs (nEO = 0-1) and APs at low ppb levels (LODs = 1-5 microg/kg) in sediment samples. Optimization of the operational parameters of PLE clearly demonstrates that significant thermal losses of APs occur during extraction at elevated temperatures. The loss of octylphenol (OP) at 100 degrees C was 61.2% and of nonylphenol (NP) 40.0%, whereas other compounds were completely recovered. Thus, to avoid losses due to the volatility of alkylphenols, a low extraction temperature should be applied. The conditions that gave the best results for all target compounds were as follows: extraction solvent mixture, methanol-acetone (1:1, v/v); temperature, 50 degrees C; pressure, 1500 p.s.i.; two static cycles. Using PLE and a subsequent clean-up with solid-phase extraction (SPE), the simultaneous extraction of APEOs, APs and APECs from sediment samples was achieved yielding recoveries >70% and producing low MS background noise. The developed methodology was applied on a routine basis to the analysis of alkylphenolic compounds in sediment samples. APEOs and their persistent degradation products were detected in significant concentrations in sediments from Portuguese rivers, especially at sites situated in the proximity of industrial plants (mainly the textile industry). The total concentration of alkylphenolic compounds (APEOs+APs+APECs) ranged from 155 to 2400 microg/kg. Of all the alkylphenolic compounds, NP comprised 40 to 50% with concentrations up to 1172 microg/kg.     

Hexaaquacobalt(II) bis(hypophosphite) and hexaaquacobalt(II)/nickel(II) bis(hypophosphite)

The title compounds, hexa­aqua­cobalt(II) bis­(hypophosphite), [Co(H₂O)₆](H₂­PO₂)₂, and hexa­aqua­cobalt(II)/nickel(II) bis(hypophosphite), [Co_0.5Ni_0.5(H₂O)₆](H₂PO₂)₂, are shown to adopt the same structure as hexa­aqua­magnesium(II) bis­(hypophosphite). The packing of the Co(Ni) and P atoms is the same as in the structure of CaF₂. The Co^II(Ni^II) atoms have a pseudo‐face‐centred cubic cell, with a = b～ 10.3 Å, and the P atoms occupy the tetrahedral cavities. The central metal cation has a slightly distorted octahedral coordination sphere. The geometry of the hypophosphite anion in the structure is very close to ideal, with point symmetry mm2. Each O atom of the hypophosphite anion is hydrogen bonded to three water mol­ecules from different cation complexes, and each H atom of the hypophosphite anion is surrounded by three water mol­ecules from further different cation complexes.     

Preparation of branched cis-1,4-polybutadiene in the presence of a neodymium catalyst

It was shown that branches can be incorporated into linear chains of cis-1,4-polybutadiene produced in the presence of neodymium catalysts. Branched polymers were prepared through the copolymerization of butadiene and a low-molecular-mass polybutadiene macromonomer containing a system of conjugated C=C bonds at chain ends. The incorporation of macromonomer units into the polymer chain was confirmed by the IR spectroscopic analysis of macromonomer-perdeuterobutadiene copolymers.     

Spatial structure of β-substituted alkoxyvinyl trifluoromethyl ketones

Spatial structure of six β-substituted enones, with common structure R₁O–CR₂CH–COCF₃, were R₁ = C₂H₅, R₂ = H (ETBO); R₁ = R₂ = CH₃ (TMPO); R₁ = C₂H₅, R₂ = C₆H₅ (ETPO); R₁ = C₂H₅, R₂ = 4- O₂NC₆H₄ (ETNO); R₁ = C₂H₅, R₂ = C(CH₃)₃ (ETDO) were investigated by ¹H and ¹⁹F NMR, infrared spectroscopy and AM1 calculations. NMR spectra revealed that enones (MBO), (ETBO) and (TMPO) are exclusively (3E) isomers, whereas in (ETPO), (ETNO) and especially in (ETDO) the percentage of (3Z) isomers is significant and depends on the nature of solvents. Conformational behaviour of studied enones are determined by the rotation around of CC double bond, C–C and C–O single bonds (correspondingly trifluoroacetyl and alkoxy groups), and (EZZ) conformer being the most stable in all cases. IR spectra revealed that with the exception of (ETDO) (EZZ) conformer is most populated in all cases. Bulky substituents like phenyl or tert-butyl group at β-position of enone result in the equilibrium mainly between (EZZ) and (ZZZ) forms, whereas β-hydrogen and β-methyl substituents determine the equilibrium between (EZZ) and (EEZ) or (EZE) conformers.     

Characterization of microcystins using in-source collision-induced dissociation

The efficiency of the in-source collision-induced dissociation (in-source CID) technique for the structural characterization of microcystins (MCYSTs) was evaluated. Microcystins that did not contain arginine underwent facile fragmentation to produce characteristic product ions at relatively low cone voltage and could be fully characterized based on their mass spectra. On the other hand, cyclic peptides possessing arginine residues, such as MCYST-RR, -LR, -YR and nodularin, were considerably more stable under in-source CID conditions and required higher cone voltage to induce fragmentation. This behaviour is explained in terms of the mobile proton model for peptide fragmentation that can be used as an indication for the presence of arginine when unknown microcystins are analyzed. In-source CID was applied to the characterization of microcystins released into water from a Microcystis aeruginosa culture (UTCC299) (UTCC: University of Toronto Culture Collection of Algae and Cyanobacteria). Six microcystins were detected in extracts from UTCC299: I, [D-Asp(3)]MCYST-LR; II, MCYST-LR; III, isomer of MCYST-LR; IV, isomer of methyl MCYST-LR; V, [D-Asp(3), Glu(OCH(3))(6)]MCYST-LR; and VI, [D-Glu(OCH(3))(6)]MCYST-LR. In-source CID provided mass spectral patterns similar to those obtained by CID in the collision cell of the mass spectrometer but was more sensitive for the analysis of microcystins.     

Preparation and study of carboxymethylstarch

It has been shown that when a mixture of starch with sodium hydroxide and monochloroacetic acid is irradiated, the carboxymethylstarch (CMS) obtained consists of fractions with high levels of carboxymethyl groups and fractions with a predominant content of carbonyl groups, and when this mixture is subjected to mechanical treatment a far-reaching rearrangement of the structure of the starch takes place with its homogeneous interaction with the reagents to form CMS.Institute of Physical Organic Chemistry, Academy of Sciences of the Belorussian SSR, Minsk. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 691–695, November–December, 1984.